New version | AquaVolta® Hydrogen Booster | highly concentrated hydrogen water

New version of the AquaVolta® Hydrogen Boosters

Procedure for testing the molecular hydrogen content with the H2 Blue Kit®

The molecular hydrogen content test with the H2 Blue® Kit is carried out immediately after production. To do this, carefully fill a 6 ml water sample into the measuring cup and add a drop of the blue measuring liquid. Each drop that discolors represents 0,1 ppm (=100 ppb) of dissolved hydrogen gas. If a drop no longer discolors itself, you can stir gently.

If the liquid still does not change color, the last drop added to the water no longer counts. Water under normal atmospheric pressure can contain up to 1,6 ppm hydrogen gas (full saturation). With the AquaVolta® hydrogen booster you can also produce supersaturated water with over 6 ppm. However, this falls back to full saturation within a few minutes when the sample comes into contact with the normal atmosphere. If you want a lot of hydrogen, you have to drink it quickly.

Measurement | Hydrogen content | with the H2 Blue Kit®

1. In the picture (middle) you can see the normal container of the AquaVolta® hydrogen booster, which was filled with 0,2 l tap water (Munich) and 10 drops of the H2 Blue Kit ® reagent solution.
2. After 25 seconds of operation, the solution decolorized and thus detected dissolved hydrogen.
3. In the 7 minute operating level, the AquaVolta® hydrogen booster achieved 1,7 ppm with the same tap water.
   This corresponds to a supersaturation of 0,1 ppm.

Hydrogen testing by titration (H2 Blue Kit ® test drops)