AQUACENTRUM / FAQs / Descaling | Water ionizer maintenance / How do I descale an undercounter water ionizer | e.g. EOS Revelation, Tyent UCE 9000 or Ionquell Delphi?

How do I descale an undercounter water ionizer | e.g. EOS Revelation, Tyent UCE 9000 or Ionquell Delphi?

Descaling under-sink ionizer | EOS Revelation

An under-sink water ionizer presents a particular difficulty because almost all under-sink water ionizers (Tyent UCE 9000, Ionquell Delphi, ...) have serious difficulties with hard water.

Almost all of them, because of that AquaVolta® EOS Revelation II water ionizer an exception is:

After the ON-OFF operating sensor has been touched to switch it off, it reverses the electrode polarity for a few seconds and flushes the cleaning water out of the device.

However, this is not enough to keep the two outlets free of limescale in the long term, so descaling is best carried out every 2-6 months. The video explains exactly what you should pay attention to.

Descaling under-sink ionizer | AquaVolta® Elegance

Although the AquaVolta® Elégance has a sophisticated descaling concept, namely the automatic flow reversal after every change in the polarization of the electrodes, it is also the case with the AquaVolta® Elegance It is necessary to descale the under-sink water ionizer regularly.

Depending on usage, descaling may be necessary every 4 weeks to 12 months. This depends on various factors, which are shown as follows:

  • Water hardness or the lime content of tap water
  • The set water flow: the slower, the stronger the end result, the faster the calcification of the alkaline hydrogen water outlet
  • The level set, the stronger the electrolysis power, the faster the calcification
  • The total amount of alkaline water produced daily

The video on the left is very informative.

Link to FAQ post

Leave a Comment

Your e-mail address will not be published. Required fields are marked with * marked

 
 
Home
AI assistant
My Account
Skip to content