Experience report with the Osmoveda H2, H2 Turbo Booster and the H2 Inspirator hydrogen inhaler
Hi Yasin,
I wanted to give a little update on my experiences with the devices I purchased and I also have a few questions.
1.) With the Osmoveda H2 I'm super satisfied. The water tastes excellent and my drinking water test also confirmed the very good water quality. I just wanted to ask again whether the software update to improve the cooling function is already available?
2.) The H2 inspirator I've been using it for a few weeks now and I think I've noticed at least a small improvement in my respiratory problems. Unfortunately it's not quite good yet, but I'll keep at it. …
3.) I have a total of 3 turbo booster, at the beginning only 2 of them were in use, now all 3 devices are used by different people. Unfortunately, I noticed that the third device hardly "bubbles" and apparently produces very little H2. When you open it afterwards, for example, there is no hissing and your shake test hardly shows any H2 either. Is there a trick to properly reactivate the membrane? Or could it be a defect? I used all 3 devices identically.
Overall, I am extremely satisfied with the devices! Thanks again!
If you could help me with my questions, I would be very happy.
Best regards,
Daniel
Answer from Yasin Akgün
Hey Daniel,
Thank you very much for your kind words and experiences. To your questions:
- Yes, we've been fighting with the manufacturer for a while, but an update will be available in the next few days, then I'll send you the tool and you can do it yourself, okay? Or we can do it for you. I will then write to you, an order has already been created.
- Because of the inhaler. Yes, stay tuned, I will soon send you the 150 MHz oscillator for testing. Then you should definitely feel something.
- It may be that one of you has a problem with the lid, please replace the lid and also try the following: Fill the bottle almost to the brim without closing the lid without any air pockets, and then let it run for about 10 times for 5 minutes with a 10 minute gap in between . So 5 times level 2, which has a 10 minute break in between. Afterwards, water should have come out of the lid because the pressure relief valve will have opened more often, but you then worked it up to 5 bar pressure and let it run there a few times, which will then have activated the membrane well. If that doesn't help, descale with citric acid and let it run for 10 seconds while descaling. The bottle doesn't have to be full. Then rinse it out, then fill it completely and close the lid without any air pockets and then let it run. When does water come out of the lid, after just 5 minutes? If water comes out after 5 minutes or after 10 minutes at the latest, then the booster is ok. If that doesn't work, we'll replace the booster.
See also the two videos below, where we also explain the topics.
I hope this helps you further. All love
Age
